Items where Subject is "Engineering"

Group by: Creators | Item Type
Jump to: A | B | C | D | G | H | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | Ç
Number of items at this level: 75.

A

A, VedanthSrivatson and C, Chellaswamy and B, Ramasubramanian and G, Vikram and T, Ramachandran (2022) BORDER SURVEILLANCE SYSTEM USING ARDUINO UNO FOR SOLDIERS. NCERC International Journal of Advanced Science, Engineering and Technology, 1 (1). pp. 1-14.

Abegunde, A. S. and Ojo, O. O. and Farayibi, P. K. and Adeyinka, A.M (2024) Laser Engraving Processes on AISI 304 Stainless Steel: A Multi-Objective Optimization Approach. Journal of Engineering Research and Reports, 26 (11). pp. 313-331. ISSN 2582-2926

Abiola, Monsur Opeyemi and Omoyajowo, Michael Olamide and Afolabi, Boluwatife Adesola and Joseph, Oke Temidayo and Tochi, Nkwocha Stephen and ., Nkwocha Janet E and Audu, Blessing Akum (2024) An Investigation into Building Functional Failures in Akure South Local Government, Ondo State, Nigeria. Journal of Engineering Research and Reports, 26 (9). pp. 214-229. ISSN 2582-2926

Agudon, Aiza Marie E. and Arellano, Frederick P. and Bacquian, Bryan Christian S. (2021) Laser DAF Cut: A Breakthrough Approach of Die Attach Film Singulation for Thin Wafers. Journal of Engineering Research and Reports, 20 (7). pp. 68-80. ISSN 2582-2926

Ahmed, Moustafa and Al-Hadeethi, Yas and Alghamdi, Ghodran (2021) Influence of Fiber Properties on Harmonic and Intermodulation Distortions of Semiconductor Lasers. Journal of Engineering Research and Reports, 20 (7). pp. 56-67. ISSN 2582-2926

Ahmed, Rubel and Uddin, Reaz and Jewel Rana, B. M. and Selim, Rafrafin and Ahmmed, Sarder Firoz (2016) Study on Periodic MHD Flow with Temperature Dependent Viscosity and Thermal Conductivity past an Isothermal Oscillating Cylinder. World Journal of Mechanics, 06 (11). pp. 419-441. ISSN 2160-049X

Au, Loan Thi Kim and Park, Hoon Cheol and Lee, Seok Tae and Hong, Sung Kyung (2022) Clap-and-Fling Mechanism in Non-Zero Inflow of a Tailless Two-Winged Flapping-Wing Micro Air Vehicle. Aerospace, 9 (2). p. 108. ISSN 2226-4310

Awgichew, Dessalegn and Sakthivel, S. and Solomon, Eshetu and Bayu, Addisalem and Legese, Robel and Asfaw, Daniel and Bogale, Meseret and Aduna, Alemu and Senthil Kumar, S. and Sun, Baozhong (2021) Experimental Study and Effect on Recycled Fibers Blended with Rotor/OE Yarns for the Production of Handloom Fabrics and Their Properties. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

B

Bai, Jingsong and Yu, Jidong and Wang, Tao (2014) Numerical Investigation of Bismuth Unloading Solidification with Abnormal Melting Characteristic. World Journal of Mechanics, 04 (07). pp. 203-209. ISSN 2160-049X

Buera, Maria Virginia S. and Mendoza, Mariane A. and Gomez, Frederick Ray I. (2021) Proactive Verification of Strip Y-Index to Mitigate Gross Misaligned Cut due to Mismatched Unit Pitching. Journal of Engineering Research and Reports, 20 (7). pp. 12-19. ISSN 2582-2926

C

Chi, Ziming and Zhang, Bingyan (2018) A Sentence Similarity Estimation Method Based on Improved Siamese Network. Journal of Intelligent Learning Systems and Applications, 10 (04). pp. 121-134. ISSN 2150-8402

D

Dong, Huifang and Hu, Jian and Calado, Veronica (2021) Numerical Simulation and Experimental Study on Sealing Performance and Frictional Property of Rotary Lip Seal. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

de Pedro, Sandra and Muñoz-Berbel, Xavier and Rodríguez-Rodríguez, Rosalia and Sort, Jordi and Plaza, Jose A. and Brugger, Juergen and Llobera, Andreu and Cadarso, Victor J. (2016) Characterization of Ferrofluid-Based Stimuli-Responsive Elastomers. Frontiers in Mechanical Engineering, 2. ISSN 2297-3079

G

Gao, Jiaxin and Zhou, Zirui and Ai, Jiangshan and Xia, Bingxin and Coggeshall, Stephen (2019) Predicting Credit Card Transaction Fraud Using Machine Learning Algorithms. Journal of Intelligent Learning Systems and Applications, 11 (03). pp. 33-63. ISSN 2150-8402

Gomez, Frederick Ray I. (2020) Small-Signal Analysis of Common-Gate Amplifier for RF Applications. Journal of Engineering Research and Reports, 13 (2). pp. 20-24. ISSN 2582-2926

Gualtieri, Thomas and Bandyopadhyay, Amit (2016) Laser Engineering Net Shaping of Microporous Ti6Al4V Filters. Frontiers in Mechanical Engineering, 2. ISSN 2297-3079

H

Hsu, Yao Tzu and Chang, Shun Chi and Hsu, Tzu Hsin (2020) Analysis of Traffic Accident Severity at Intersection Using Logistic Regression Model. Journal of Engineering Research and Reports, 13 (4). pp. 1-9. ISSN 2582-2926

Huang, Kan and Sun, Yiwei and He, Jun and Huang, Xianqiang and Jiang, Meng and Li, Yujian and Giorgio, Ivan (2021) Comparative Study on Grouting Protection Schemes for Shield Tunneling to Adjacent Viaduct Piles. Advances in Materials Science and Engineering, 2021. pp. 1-19. ISSN 1687-8434

J

Jayaprakash, V. and Anish, M. and Senthilkumar, J. and Aakaash, S. R. and Manikandan, K. and Sivabalan, A. King (2024) Experimental Study on the Tribological and Mechanical Properties of Aluminium Bonded with Alumina Ceramic. In: Current Approaches in Engineering Research and Technology Vol. 8. BP International, pp. 78-90. ISBN 978-93-48119-51-3

Joshi, Narahari V. (2014) A Foundation for Lorentz Force Based on Vibrating Strings as a Compact Fluid. World Journal of Mechanics, 04 (08). pp. 247-250. ISSN 2160-049X

K

Kamo, Shumpei and Rosenow, Judith and Fricke, Hartmut and Soler, Manuel (2022) Fundamental Framework to Plan 4D Robust Descent Trajectories for Uncertainties in Weather Prediction. Aerospace, 9 (2). p. 109. ISSN 2226-4310

Kang, Xiyu and Wang, Yiqi and Hu, Yanrui (2019) Research on Different Heuristics for Minimax Algorithm Insight from Connect-4 Game. Journal of Intelligent Learning Systems and Applications, 11 (02). pp. 15-31. ISSN 2150-8402

Khadka, Dak Bahadur (2021) Experimental Design of Physical Unconfined Aquifer for Evaluation of Well Abstraction Effects: Laboratory Approach. Journal of Engineering Research and Reports, 20 (7). pp. 90-102. ISSN 2582-2926

Khedher, Asma Ben and Jraidi, Imène and Frasson, Claude (2019) Tracking Students’ Mental Engagement Using EEG Signals during an Interaction with a Virtual Learning Environment. Journal of Intelligent Learning Systems and Applications, 11 (01). pp. 1-14. ISSN 2150-8402

Kruželák, Ján and Kvasnicakova, Andrea and Džuganová, Michaela and Dosoudil, Rastislav and Hudec, Ivan (2024) Cross-linking Process, Mechanical Properties and EMI Absorption Shielding Efficiency of Composites Based on NBR. In: Current Approaches in Engineering Research and Technology Vol. 8. BP International, pp. 29-51. ISBN 978-93-48119-51-3

L

Lahbacha, Khitem and Sibilia, Sarah and Trezza, Gianmarco and Giovinco, Gaspare and Bertocchi, Francesco and Chiodini, Sergio and Cristiano, Francesco and Maffucci, Antonio (2022) Electro-Thermal Parameters of Graphene Nano-Platelets Films for De-Icing Applications. Aerospace, 9 (2). p. 107. ISSN 2226-4310

Li, Peng and Wu, Yun-Quan and Zhang, Ying and Cai, Xin (2021) Mechanical and Acoustic Responses of Brittle Geomaterials with a Hole under a Compressive Disturbance. Advances in Materials Science and Engineering, 2021. pp. 1-18. ISSN 1687-8434

Liu, Hongze and Wang, Shoubo and Qu, Meihang (2024) Design and Simulation of Mobile Multi-Robot Machining Platform. Journal of Engineering Research and Reports, 26 (6). pp. 178-189. ISSN 2582-2926

Loya, Adil and Khan, Muhammad Zia Ullah and Bhutta, Rumeel Ahmad and Saeed, Muhammad (2016) Dependency of Torque on Aerofoilcamber Variation in Vertical Axis Wind Turbine. World Journal of Mechanics, 06 (11). pp. 472-486. ISSN 2160-049X

M

Mahajan, Valmik M. and Ghumare, S. M. and Sairam, Velchuri and Petare, K. D. (2024) Effect of Thickness Stretching on the Static Deformation and Dynamic Analysis of Composite Arches. In: Current Approaches in Engineering Research and Technology Vol. 5. B P International, pp. 149-167. ISBN 978-81-976377-1-1

Mamaghani, Nasim A. and Jenkins, Peter E. (2020) Computational Fluid Dynamics Analysis of Multi-Bladed Horizontal Axis Wind Turbine Rotor. World Journal of Mechanics, 10 (09). pp. 121-138. ISSN 2160-049X

Matsson, Leif (2016) Higgs-Like Mechanism by Confinement of Quarks in a Chemical Non-Equilibrium Model. World Journal of Mechanics, 06 (11). pp. 441-455. ISSN 2160-049X

Mendoza, Mariane and Buera, Maria Virginia and Gomez, Frederick Ray (2021) Maximizing the Process Capability of Singulation Machine by Dual Work Piece Cutting on Circular Tape Frame. Journal of Engineering Research and Reports, 20 (7). pp. 51-55. ISSN 2582-2926

Miller, Scott T. and Campbell, R. L. and Elsworth, C. W. and Pitt, J. S. and Boger, D. A. (2014) An Overset Grid Method for Fluid-Structure Interaction. World Journal of Mechanics, 04 (07). pp. 217-237. ISSN 2160-049X

Moreno, Anthony and Jr., Edwin Graycochea and Gomez, Frederick Ray (2020) Wire Shorting Elimination through Wirebond Process Optimization of Semiconductor Sensor Device. Journal of Engineering Research and Reports, 13 (4). pp. 10-14. ISSN 2582-2926

Muktar, Abdullahi and Yelwa, Sadiq A. and Bello, Muhammad Tayyib and Elekwachi, Wali (2021) Geo-spatial Analysis of Farmland Affected by 2020 Flooding of River Rima, Northwestern Nigeria. Journal of Engineering Research and Reports, 20 (6). pp. 20-27. ISSN 2582-2926

N

Nataliya, Pryadko and Hennadii, Strelnikov and Katerina, Ternova (2024) Flow in Shortened Round Supersonic Nozzle with a Bell-shaped Tip. In: Current Approaches in Engineering Research and Technology Vol. 8. BP International, pp. 52-77. ISBN 978-93-48119-51-3

Nene, Sinqobile Wiseman and Abe, Bolanle Tolulope and Nnachi, Agha Francis (2024) Cost-effective Rural Electrification with Capacitor Coupled Substations: A Simulation Approach. In: Current Approaches in Engineering Research and Technology Vol. 5. B P International, pp. 168-185. ISBN 978-81-976377-1-1

Nta, S. A. and Ayotamuno, M. J. and Igoni, A. H. and Okparanma, R. N. (2020) Leachate Characterization from Municipal Solid Waste Dump Site and Its Adverse Impacts on Surface Water Quality Downstream - Uyo Village Road, Akwa Ibom State - Nigeria. Journal of Engineering Research and Reports, 13 (2). pp. 11-19. ISSN 2582-2926

O

Okeke, U. K. and Nwaichi, E. O. and Ugbebor, J. N. (2021) Occupational Health and Safety Management System and Organizational Performance in Selected Industries in Cross River State, Nigeria. Journal of Engineering Research and Reports, 20 (7). pp. 1-11. ISSN 2582-2926

Okon, John Effiong and Oboh, Innocent Oseribho (2024) Modelling and Optimization of a Brewery Plant from Starch Sources using Aspen Plus. Journal of Engineering Research and Reports, 26 (8). pp. 82-93. ISSN 2582-2926

Olszewski, Stanisław (2020) Two Problems of Time Entering Respectively the Relativistic Mechanics and Electron Transport in Quantum Theory. World Journal of Mechanics, 10 (10). pp. 186-197. ISSN 2160-049X

Onwudili, Anthony Edozie and Iweka, Sunday Chukwuka (2021) Full-annealing and its effect on the Mechanical Properties of Alloy 304H Stainless Steel. Journal of Engineering Research and Reports, 20 (7). pp. 28-44. ISSN 2582-2926

P

Patel, Vishnu B. and Patel, Rajesh M. (2024) An Optimal Reactive Power Management Using SPEA and NSGA II. In: Current Approaches in Engineering Research and Technology Vol. 8. BP International, pp. 91-106. ISBN 978-93-48119-51-3

Paul, Mariya and Paul D, Mariya (2022) SOLAR ENERGY AND ENHANCED REVERSE OSMOSIS BASED MOBILE HYBRID WATER PURIFIER. NCERC International Journal of Advanced Science, Engineering and Technology, 1 (1). pp. 24-35.

Pulido, J. and Gomez, F. R. and Graycochea Jr., E. (2021) Off-centered Ball Resolution Through Multi-hole Process Plate Implementation at Wirebond Process. Journal of Engineering Research and Reports, 20 (7). pp. 45-50. ISSN 2582-2926

Q

Qiu, Zehua (2020) A Simple Theory of Asymmetric Linear Elasticity. World Journal of Mechanics, 10 (10). pp. 166-185. ISSN 2160-049X

R

Rahikainen, Ahti (2020) Galaxy Rotation in the Space of Four Distance Dimensions. World Journal of Mechanics, 10 (07). pp. 83-94. ISSN 2160-049X

Raina T A, Annai and D, Marshiana (2022) CHARGING OF ELECTRIC VEHICLE IN-MOTION. NCERC International Journal of Advanced Science, Engineering and Technology, 1 (1). pp. 15-23.

Rajan, Soundar and Dayan, Moshe (2022) HYDROGEN PRODUCTION FROM SOLAR TRACKER WITH MPPT TECHNIQUE IN SEAWATER ELECTROLYSIS. NCERC International Journal of Advanced Science, Engineering and Technology, 1 (1). pp. 50-65.

Ramesh, R. and Palanivel, Hemalatha and Venkatesa Prabhu, S. and Tizazu, Belachew Zegale and Woldesemayat, Adugna Abdi and Chelladurai, Samson Jerold Samuel (2021) Process Development for Edible Film Preparation Using Avocado Seed Starch: Response Surface Modeling and Analysis for Water-Vapor Permeability. Advances in Materials Science and Engineering, 2021. pp. 1-7. ISSN 1687-8434

Rayapole, Shiva Prasad and Jakkula, Anand Rao (2016) Characteristics of Nanofluids over a Non-Linearly Stretched Sheet under the Influence of Thermal Radiation and Magnetic Field. World Journal of Mechanics, 06 (11). pp. 456-471. ISSN 2160-049X

Rodriguez, Rennier and Gomez, Frederick Ray and Maming, Maiden Grace (2020) Advanced Semiconductor Design through Specialized Printable Conductive Layer. Journal of Engineering Research and Reports, 13 (2). pp. 43-47. ISSN 2582-2926

Rushdi, Ali Muhammad Ali and Alsalami, Omar Mutab (2020) Reliability Evaluation of Multi-State Flow Networks Via Map Methods. Journal of Engineering Research and Reports, 13 (3). pp. 45-59. ISSN 2582-2926

S

Shang, Xin and Pang, Lijuan and Chen, Sheng-Gui and de Oliveira Correia, José António Fonseca (2021) Multiobjective Optimization for Forming Process Parameters of Ultrahigh Strength Steel BR1500HS. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Shanour, Ali S. and Khalil, Ahmed Abdelmoamen and Riad, Hany Sobhy and Bakry, Heba Mahmoud (2020) Experimental and Analytical Investigations of Innovative Composite Materials Using GFRP and Iron Slag for Railway Sleepers. Journal of Engineering Research and Reports, 13 (2). pp. 25-42. ISSN 2582-2926

Shats, Vladimir N. (2019) On the Matrices of Pairwise Frequencies of Categorical Attributes for Objects Classification. Journal of Intelligent Learning Systems and Applications, 11 (04). pp. 65-75. ISSN 2150-8402

Shimada, Kunio and Kato, Ryoju and Ikeda, Ryo and Kikura, Hiroshige and Takahashi, Hideharu (2020) γ-Ray Irradiation Effect on MCF Rubber Solar Cells with both Photovoltaics and Sensing Involving Semiconductors Fabricated under Magnetic and Electric Fields. World Journal of Mechanics, 10 (08). pp. 95-119. ISSN 2160-049X

T

Talledo, Jefferson (2021) Improving the Solder Joint Reliability Prediction Accuracy for Quad Flat No Lead Packages. Journal of Engineering Research and Reports, 20 (7). pp. 81-89. ISSN 2582-2926

Tamás, Péter and Bányai, Tamás and Illés, Béla and Tollár, Sándor and Veres, Péter and Cservenák, Ákos and Hardai, Ibolya and Skapinyecz, Róbert (2020) Development Possibilities of the High-tech Logistics Laboratory Established at the Institute of Logistics of the University of Miskolc. Journal of Engineering Research and Reports, 13 (3). pp. 60-68. ISSN 2582-2926

U

Udo, Aniekan Daniel (2024) Evaluating the Compaction Behavior of Oil-contaminated Soils for Civil Engineering Applications. Journal of Engineering Research and Reports, 26 (7). pp. 102-120. ISSN 2582-2926

Usarov, Мakhamatali K. (2016) Dynamic Design of Thick Orthotropic Cantilever Plates with Consideration of Bimoments. World Journal of Mechanics, 06 (10). pp. 341-356. ISSN 2160-049X

Uzoigwe, Stella Awele Asoya and Atoofi, Maryam and Lewis, Hollie and Onyedikachukwu, Ndekwu, Benneth (2023) Investigating the Challenges of Engineering Project Managers in achieving Sustainability in the UK Construction Industry. Journal of Engineering Research and Reports, 24 (9). pp. 14-24. ISSN 2582-2926

V

V, Sangeetha and P, Sundaramoorthi (2022) SOLAR PADDY DRYER WITH SOLAR PADDY COOKING SYSTEM. NCERC International Journal of Advanced Science, Engineering and Technology, 1 (1). pp. 36-49.

W

Wang, Kui and Xia, Zhengting and Huang, Zhen and Li, Xue and Hay, Rotana (2021) Damage Evolution of Sandstone under Constant-Amplitude Cyclic Loading Based on Acoustic Emission Parameters and Resistivity. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Wijesinghe, Vikum S. and Premaratne, Upeka Kanchana (2016) Bandwidth Reduction and Convergence Analysis of Extremum Seeking Control with Feedback Encoding. Frontiers in Mechanical Engineering, 2. ISSN 2297-3079

Witteveen, Wolfgang and Wagner, Carina and Jachs, Patrick and Froschauer, Stefan and Schöffl, Harald (2014) Pilot study on the Non-Invasive Detectability of Femoral Neck Fractures with Frequency Response Functions. World Journal of Mechanics, 04 (07). pp. 210-216. ISSN 2160-049X

X

Xie, Siwei and Huang, Feng and Wang, Guihe and Zhu, Chaoyang and Su, Yunji and Qian, Feng and Song, Zhengyang (2021) Mechanical Responses to Different Excavation Methods of Qichongcun Tunnel in Guiyang City, China. Advances in Materials Science and Engineering, 2021. pp. 1-18. ISSN 1687-8434

Y

Yamagata, Yukihiko and Iwasaka, Ryo and Shigyo, Keita and Tanaka, Juntaro and Kawaguchi, Yasuyuki and Muraoka, Katsunori (2020) Simple Optical Measurements of Pre-treated Surface Roughness for Thermal Spray. Journal of Engineering Research and Reports, 13 (2). pp. 1-10. ISSN 2582-2926

Ye, Wanjun and Wu, Yuntao and Bai, Yang and Ruffino, Francesco (2021) Study of Macro- and Mesodamage of Remolded Loess under Alternating Dry and Wet Conditions in an Acid Rain Environment. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Z

Zakavi, S. J. and Ajri, M. and Golshan, V. (2014) The Ratcheting Behaviour of Plain Carbon Steel Pressurized Piping Elbows Subjected to Simulated Seismic In-Plane Bending. World Journal of Mechanics, 04 (07). pp. 238-246. ISSN 2160-049X

Zhang, Shu and Xue, Binghan and Wang, Jing and Gao, Jianglin and Wang, Chaojie and Li, Wenzhong and Song, Zhengyang (2021) Preliminary Study of Nondestructive Testing of the Polymer Cutoff Wall Based on Vibration Theory. Advances in Materials Science and Engineering, 2021. pp. 1-7. ISSN 1687-8434

Zhang, Zhibin and Li, Xinhong and Wang, Xun and Zhou, Xin and An, Jiping and Li, Yanyan (2022) TDE-Based Adaptive Integral Sliding Mode Control of Space Manipulator for Space-Debris Active Removal. Aerospace, 9 (2). p. 105. ISSN 2226-4310

Zhao, Gang and Qiu, Tian and Liu, Peng (2022) Influence of Blade Fracture on the Flow of Rotor-Stator Systems with Centrifugal Superposed Flow. Aerospace, 9 (2). p. 106. ISSN 2226-4310

Ç

Çakir, M. T. and Ün, Ç. (2020) CFD Analysis of Smoke and Temperature Control System of Car Park Area with Jet Fans. Journal of Engineering Research and Reports, 13 (3). pp. 27-40. ISSN 2582-2926

This list was generated on Fri Dec 6 02:01:12 2024 UTC.